Tuesday, 1 November 2011

Bowens Gemini lighting session







What we did to get these pictures were that we had Bowens Gemini lightning to make the pictures look better.
We had to set up the lighting by first getting the tripod out then connected it to the light after that we got the battery and hooked it up to the light.
The camera we used was a cannon 5D and that was also connected to the lighting equipment. so that as we take pictures it would flash to give better lighting in the image. 
when using the camera we learned about ISO , shutter speed and F stops.
ISO controls the cameras sensitivity to light so the higher the sensitivity the less light is needed. This is useful for taking effective pictures for example if an image is too light we could turn the sensitivity down or if you were taking a picture in the evening you could turn the ISO up to get more light.
Shutter speed controls the time the shutter is open letting light through the lens to the sensor inside the camera The times vary from very small seconds to several seconds. This would be useful if it was a bright day and there is a lot of light and you take a picture of something  you may have the problem of leaving the shutter open too long and the too much light would get into the sensor making the image pale/white.





No comments:

Post a Comment